Sorry for being such a noob. My networking is not very strong, thought I’d ask the fine folks here.
Let’s say I have a Linux box working as a router and a dumb switch (I.e. L2 only). I have 2 PCs that I would like to keep separated and not let them talk to each other.
Can I plug these two PCs into the switch, configure their interfaces with IPs from different subnets, and configure the relevant sub-interfaces and ACLs (to prevent inter-subnet communication through the router) on the Linux router?
What I’m asking is; do I really need VLANs? I do need to segregate networks but I do not trust the operating systems running on these switches which can do L3 routing.
If you have a better solution than what I described which can scale with the number of computers, please let me know. Unfortunately, networking below L3 is still fuzzy in my head.
Thanks!
If computers are in same network, even with different ip addresses, they still can see all broadcast and multicast traffic. This means for example dhcp.
If you fully trust your computers, and are sure that no external party can access any of them, you should be fine. But if anyone can gain access to any of your computers, it is trivial to gain access and sniff traffic in all networks.
If you need best security, multiple switches and multiple nics are unfortunately only really secure solution.
Broadcast traffic (such as DHCP) doesn’t cross subnets without a router configured to forward it. It’s one of the reasons subnets exist.
No, I do not trust my computers that much. Quite unfortunate, really that I’ll have to build a whitebox switch to get what I want