Here’s a full write-up on the first year of my Home-Lab: https://piefed.social/post/1002037
Since then I’ve now added networking and a self built 10" rack, I was undecided between MikroTik and UniFi but ended up going UniFI and I’m quite happy.
Building the 2020 Aluminum profile 10" server rack was a lot of fun and I learnt a lot of lessons along the way like:
- Cutting perfectly straight with a hacksaw is a bitch and nearly impossible (or at least for me) would not recommend.
- Buy a table/mitre saw or have them pre-cut
- Tapping threads yourself is a lot of fun, and I would recommend doing it yourself, worked perfectly every time.
- Bolt length and head size matters, even 1mm matters (that’s what she said)
It’s janky I know, but I love it and it’s a lot less Janky than when everything was just on my desk
Next step for me would be to buy a 3D Printer (Sovol S6 Plus Ace) and print custom racks for everything
Shout out to https://www.motedis.com for the Aluminum parts, they can cut and tap all the parts to your desired length if you don’t want to bother with that, but that’s half the fun (and frustration)
A table saw is for lengthwise cuts, for cutting long things like these you need a cut-off saw.
Fun fact, you don’t really need to tap soft aluminium like this. You can just drive the bolt straight in with an impact driver. I thought it was sketch at first, having always tapped them beforehand. But my buddy said it’s a waste of time, just drive the bolts in right away. So I tried it and he was right, it works perfectly every time. They form perfect threads so you can easily remove and re-add the bolt just like when it was tapped beforehand.
I have enough of a machinist background to doubt the threads are anywhere close to perfect. However if you are saying more than good enough I will agree.