Most people won’t close their facebook account. if it ever does happen it will be because the accounts are purged (highly unlikely given facebooks raging hardon for data) or that the site undergoes a massive transformation after losing a ton of value and rebranding ala myspace.

That likely wouldn’t happen for many many years until a solid competitor arose that grew enough to overtake them and that’s real challenging given their size. It was one thing when user counts were in the millions or even tens or hundreds of millions but facebook has several billion users. That’s like a sizable chunk of the entire population of earth.

It would take a very novel approach to overcome those numbers and then you also have to consider momentum: at this point there are a great deal of people who consider facebook “the internet”. Like they open their browser/phone and that’s what they do. It is their habit. Then in second place you have instagram so even if you knocked facebook off meta would still ultimately be ok. And with the incubation period of social media they’d probably have another one up and coming long before your threat became viable that would have the benefit of starting in like 7th place simply because of their massive market share (see: threads). By the time your social network had the 10ish years it takes to get to hundreds of millions of users they’d potentially have that one at a billion, or have pulled the plug and moved on to another trial with a massive head start

Doesn’t mean to give up on the fediverse stuff, just that the gross corporate social media likely wont go away for a very long time, if ever. Barring outside influence like regulatory change of course

Moving to a rack is nice, I love my rack. If you’re in or near a city I suggest keeping an eye on Craigslist and ebay (search by distance nearest and lowball ones that have been sitting for months) because it’s not uncommon for nice racks to go real cheap as long as you come get them. I got my rack realllll cheap ($40, 42u, fully enclosed with massive pdu) because it’s a 90s ibm rack and it’s welded steel so it’s like 450lbs. Moving it was a nightmare but it’s real sturdy and I’m never moving it again now that it’s in my basement

For my goals in the short term I have to replace a sas cable that caused a crc error on one drive, it only happened once per smart data but still want to get that done asap. I also have another drive that’s beginning to show some smart issues; it’s on the same sas cable so it may be related because the errors didn’t increase (they all were related to an unclean shutdown, confusing things) but it’s old anyway so better safe than sorry I guess.

Medium term I want to finally upgrade my ups. The one I have now is not a rack mount which is part of what led to the unclean shutdown. It’s also a bit undersized. I have a generator for my house so I don’t need something massive but the one I have is 450va and several years old so with the tired battery I only can get about 5m of runtime. It’s more than enough to cover the transfer from power cutting out to generator power but I want something that’s a bit more reliable in case of generator failure. This is pricey though because my array is pretty huge so it’ll probably be held off unless I find a good deal on a dead one that has cheap batteries available

I also want to put the rack on its own circuit. This is something I should do asap because it’s cheap, just gotta find time and rearrange my panel a bit because it’s pretty full. This would be the other part of the unclean shutdown as the outlet would be in a much better location and I could also install a locking outlet

Would also be nice to pick up a super cheap monitor locally, like something for $15-20 from a pawn shop or Craigslist or something for the rack. Earlier this year I had nginx crash on my server and the webui became inaccessible, I had to drag my nice and kind of large desktop monitor down to the basement to solve the issue, would be nice to just have a shitty small monitor on the rack for that

Speaking of nginx I keep meaning to setup some kind of reverse proxy or mdns for all my dockers so that I can just do whatever.whatever instead ipaddress:3993 which makes my password managers barf but I’ll probably just be lazy and edit my hosts file

Longer term I want to add a secondary low power server that can run something like pfsense to handle my routing, then turn my current wireless routers into access points because they kind of suck as routers.

And of course the array could always be bigger, especially if drive prices fall

I will probably realistically only do the drive and cable replacement, the circuit thing since that’ll be like $40 and a half hour of work, the monitor if I can find one, and maybe the hosts file thing. If I run into cash (unlikely) or a crazy deal (you never know) the ups would be my next priority but there’s a million other things going in life (deductibles just reset for health insurance, hooray)

I will try this out, thanks!

Any idea if playlists can directly work in external but non Jellyfin apps like finamp or kodi with Jellyfin for kodi? If not can playlists be saved/exported for use in those contexts?

just get a clamp one?

This will depend wildly on what you are planning to put onto it

That said I have a 2 cyber power 825va (I think that’s the model, not sure). It’s like 450watts each iirc. I got them 2 for 1 for about $120 new. One has my server/nas, for which it’s grossly underpowered (maybe 7-10 minutes of runtime, at best), and one powers basically everything else critical in my rack (modem, switch, poe switch, etc) and powers that longer but still not as long (my primary switch is a business switch that was pulled from an ewaste place for nothing, like $15, but it’s got 48 gigabit ports and 5 10gb ports! But it also uses a shocking amount of power).

They work great for my use case. I live in a rural area with a horrendous power grid so I lose power about once every 6 weeks. As a result I have a (very pricey, can’t recommend unless you lose power a lot like me) whole house generator with automatic transfer switch. When power drops out the generator kicks on and switches the house over to generator power which takes about 45-90 seconds, so I really only need these to keep my gear on for that period. Beyond that it’s generator monitoring and if the fuel supply for that is running low network gear is shutdown to conserve power

In a perfect world where I was financially independent I would probably upgrade the server one to at least a 1500va to ensure my storage pool could fully stop and everything could shut down even if power was lost

But most ups will work with monitoring in one way or another. APC and cyberpower work with the apc daemon (probably others) which can easily be implemented into all kinds of software and has support in mac, Linux, windows

Determining battery life depends greatly on load. Rough calculation with power supplies of gear connected, better calculation with something like a kill-a-watt or multimeter and taking a reading for a little while under load, add it all together and add 20-30% to be safe. APC, cyberpower, etc have calculators for this

Buying used can be okay but you do have to be comfortable changing the battery. Additionally there is the risk of something being wrong with it of course, they’re not bulletproof. They’re usually pretty decent though, the bigger thing is that they’re just really expensive to ship, even without batteries

pfsense running on whatever hardware that doesn’t use too much power

You can also use komf alongside komga/kavita to just scrape metadata automatically upon import. A bit finnicky to get going (a tampermonkey script is required to give it accessible setting on the komga page) but works very well and even has a gui for identifying results and selecting the correct option if the auto scrape fails similar to jellyfin

For the actual reader part I just use komga as a server and read through Mihon (one of the tachiyomi forks) on my ereader mostly. occasionally I’ll use paperback on my iphone (although recently I’ve been trying Tachimanga, which is basically an iOS tachiyomi fork). Loads library, can sort by tag/library/date added, reads most things very well, can sync read status with the komga server (and/or manga updates or whatever), etc.

Flac 44.1 16bit level 3. Host with something that meets your needs. I have my files in jellyfin and navidrome and can then access the library remotely either through jellyfin web client, navidrome web client, substreamer, Finamp, kodi, etc. but this way if another amazing format comes up down the line I will always have my library in a good state to transcode from. Tag and sort everything with beets.io (or musicbrainz picard is great, I just like that beets is cli). This results in a library I can access on my phone, laptop, tv, carplay, etc

Technically you could go for 24bit but imo the extra file size isn’t justified. though one could make that argument for flac vs 320cbr mp3, transcoding 320 mp3 is more likely to create artifacts, thus the reason for keeping around flac

Alac may be easier for you if you use mac