+1 on this idea, going to toss in my recommendation for an AMD 5600g second hand. Its basically a laptop CPU with built in GPU that handles my jellyfin transcoding without issue and has a super low idle power rating if you pair it with a quality, small PSU.

Thats friggin bananas. Do you live somewhere with lots of hydro power? Your cost is less than 1/3 mine…

My SSDs use negligible power at idle, I only noticed a 1w increase when I installed two. Almost ‘free’. Also your 0.14kwh is almost certainly just the cost to generate the power minus the delivery fees. Where I live the delivery fees double my true per kWh cost. Double check your bill and divide your monthly consumption by your monthly payment to find the real cost.

Any quality brand SSD (Samsung, Kingston, WD, etc) is going to be more reliable in every way compared to mechanical disks, they just cost a lot more right now. Do NOT buy off brand, random Chinese SSD, you will regret it.

When I bought them 2 years ago power in MA was $0.46 per kWh, this included transmission costs and all the other fees. 15W cost me $4.80 a month, so $57.6 a year and $230 over 4 years. At the time 14TB mechanical disks were about $300 so it was about a $270 ‘premium’ for solid state over mechanical so I exaggerated the ROI, but to me the 2x price premium was worth it for silence and no latency on retrieving my data. So in summary the ROI for me was more like 8 years, ignoring the many advantages of SSD.

Does no one care about power consumption? Mechanical disks use, in my experience, 7-15w all day all the time just idling. If you live in a high energy cost area the ROI on going SSD can be as low as 3-4 years. If you can afford it, splurge for SSD. I spent ~$800 on two 8tb SSDs and I’m very happy with the choice.

I bought all the gear to do 10gbe but ultimately went back to 1gig simply because the power consumption. The switch alone used 20w at idle and each NIC burned 8w and I couldn’t justify it.

So you have photoprism pointed to a folder but you push photos into the folder witb syncthing. How do you trigger the re-index or its somehow automatic? I run my photoprism in docker and I always had to manually trigger the index after changes to the folder.

As someone who has and still used photoprism for over two years and donated heavily…steer clear. Their update cycle is slow and the things they keep adding don’t seem helpful. Still no multi-user support. If you don’t upload new photos via photoprism using WebDAV you have to make your own scripts to watch for changes and refresh which took a lot of time for me to setup.

I’m just going to start using Nextcloud and Memories app going forward.

Most folks ignore laptops, but if you’re OK with USB storage or getting the special caddy to install the internal 2.5" drive you can get great deals on laptops. This one idles around 4W with the screen off.

Been using it for over a year on two 8tb SSDs in strip and 14tb as mirror. This is on Debian and its flawless and wonderful. I run btrkbk hourly for snapshots, backups to remote locations and house keeping with 6 months of hourly snaps. Life is great.

I have the micro form factor I assume the same as you. Basically just a laptop in a small desktop case. I never installed tlp I’ll have to give that a shot but I’m pretty sure it’s optimized. I have two as servers and one as a router and I’d love to get it down to 12w total! I monitor the whole server rack with an iotawatt and all my servers and networking gear hovers around 75w idle.

I’d question that. I have three 3080 and they’re consistently about 8W each with one ssd and onboard graphics. I even went so far to splice three barrel jacks to a single 60w power supply that powers all three to avoid the losses of an additional 2 power supplies and this gets me the 8w idle power with Debian and throttling.

At the risk of sounding like an oaf I just use an excel document, and these days I just keep it in nextcloud and edit it via a browser while in the driveway. Each car gets a sheet. Keeping it simple.

Ditto, though I’m getting more and more resentful by the day at the lack of multi user support. I’m not going to donate to them again.

I hear ya but my instance is old (before i knew docker) and just works on the rails. I also tweak the heck out of it for performance so I deal with the annoyance once every two years. If it completely blows up I might roll it on docker.

I understand that everyone doesn’t always have a perfect experience but I’ve been using the same instance of nextcloud for over 8 years I just keep upgrading and migrating. It just works. Only issues I’ve had is when Debian withholds updating php for too long or when they finally do all the config files for php get fucked and I have to redo them all.

Here is the list!

1 x Samsung SSD 980 1TB

1 x Adata XPG SX8200 Pro 2TB

2 x Samsung SSD 870 QVO 8TB

1 x Western digital engineering sample. Cannot comment. 4TB

1 x Seagate Exos X16 14tb

My server is a ryzen 5600g based and has; 2 x m.2 SSDs, 3xSATA SSDs (20TB) and one spun down mechanical disk (14TB) and my total idle power is around 27W. The mechanical disk is the only notable load, unplugging it can save me 5W idle and when it spins up its about 15W total. I can give you specific model numbers if you like.

I’m sorry but wireguard is not easy for beginners and the quick QR code generator in the command line was fantastic and light years ahead of fumbling around with getting config files securely to a mobile device.